The magnetically coupled centrifugal pump Aqua Medic Ocean Runner 3500 is very quiet in operation. The pump have fully encapsulated synchronous motor and can operate completely safely either submerged or out of the water. The polished ceramic shaft and bearing is practically wear resistant, ensuring a long operating life. An integrated thermal overheat protection device prevents damage to the windings should the impeller rotation be impeded. The pump can be easily taken apart for cleaning. All materials are salt water resistant. All these qualities ensure a quiet and maintenance free performance for many years. The Aqua Medic Ocean Runner OR 3500 may be installed submerged or out of the water. However it is not self priming and, if set up out of the water, has to be installed below the water surface level. If used submerged, we recommend removing the hose connection on the suction side and fitting the filter basket (included).
Connection suction side: The suction side may be connected with flexible hose, using the hose fitting included. As another option, the male thread of the pump housing can be connected to a standard PVC fitting and pipe.
Connection pressure side: The pressure side can be connected with a flexible hose, using the hose fitting included. This hose fitting must also to be fitted if the pump is used as a pure current pump. If the pump is used as return pump, it can be directly connected to PVC pipe. If a hard pipe is used for connecting the pumps, we recommend the use of a short section of flexible hose to avoid vibration
technical data Aqua Medic Ocean Runner OR 3500Do you have questions about this article ?
Power consumption: 65 W
Pump output: 3500 l/h
delivery height: 3.3 m
Connector suction side: 27 mm (1 inch)
Connector pressure side: 21 mm (3/4 inch)
Dimensions: 18x15x18 cm
Cable length: 3 m
max. depth: 1 m
Protection rating: IP 68