 | Aquatlantis Easy LED universal is a universal usable light bar with modern LED technology. The Easy LED can be simply installed in existing T5 or T8 lightings. It is also possible to use the light bar as overtank lamp using the enclosed extendable holding clamps.
| |
|
|
 | Aquatlantis Easy LED Control 1 Plus to control the Easy LED light units. With the Aquatlantis Easy LED Control simply you can control your Easy LED light. You can set up up to two different programs.
| |
|
 | Aquatlantis Easy LED Control 2 Plus to control the Easy LED light units and the LED lighting units of the Aquatlantis Aquariums. With the Aquatlantis Easy LED Control simply you can control your Aquatlantis LED lights. The Aquatlantis Easy LED Control 2 Plus has two output channels which can be controlled separately.
| |
|
 | The Luminus - Smart LED Controller allows you to program the operating time of LED light units, controlling all parameters independently and as desired by the user. With two independent channels (max. 5A per channel) with four light intervals each, allowing creating the daylight with sunrise and sunset ef ect, turning the light units on and off gradually (between 10 and 90 minutes).
| |
|
 | Aquatlantis Power Supply for the Aquatlantis LED and Easy LED. Please choose the right one for your LED lamp. Please take care of the current intensity.
| |
|
 | The new Aquatlantis Easy LED Tube is a high resistant light unit recommended for freshwater tanks. Available in seven different sizes, these LED lamps replace the traditional T5 and T8 systems. The emitted light is high quality, providing the comfort and well-being of fish and plants.
| |
|
 | Power supply for the Aquatlantis Easy LED tube lights. The power supplys are different and especially for the different lengths of the Aquatlantis Easy LED Tube lightings.
| |
|
 | With the plastic end caps you can use your Aquatlantis Easy LED Tube as hanging lamp or overtank luminaire for your aquarium. Content: 2 caps for one Easy LED Tube.
| |
|
 | With the Aquatlantis brackets for the Easy LED Tube you can use your Easy LED Tube as an overtank luminaire. The brackets are extendable and fits the Easy LED Tube for different aquarium lengths. Content: 2 extendable brackets, lengths: approx.
| |
|
 | With the Aquatlantis Easy LED Universal 2.0, the existing LED series from Aquatlantis has been consequently further developed. In addition to an improved aluminum profile for better heat dissipation and a new lens cover with 120° beam angle, the Aquatlantis Easy LED 2.0 now has 2 separately controllable channels. In conjunction with the new Aquatlantis Luminus Controller, natural lighting scenarios for your aquarium are possible.
| |
|
 | Splitter cable for the connection of two LED lamps to the Aquatlantis Easy LD Control or Easy LED Control 2 Plus.
| |
|
 | Extension cable for the Aquatlantis Easy LED lighting units. length: approx. 1.5m.
| |
|
 | With the Aquatlantis steel wire suspension kit you can use the Aquatlantis Easy LED as hanging lamp over the aquarium.
| |
|
 | Aquatlantis end caps for using the Aquatlantis Easy LED as haning lamp over the aquarium. There are two different caps available:- End Caps Size 1: for Easy LED 438/590/742/895/1047 mm- End Caps Size 2: for Easy LED 1200/1450 mm.
| |
|
