| Art.No.
| Articles / Informations |
Prices
|
|
518200
 |
The IKS aquastar is a state-of the start system of modular construction that caters for all of your needs where automatic monitoring and control of every major water and lighting factor is concerned for both fresh- and seawater aquariums. With it, you can build up your own individual system to suit your personal requirements and your pocket.Besides extensive timed functions, you also have at your fingertips measuring modules for pH-value, redox potential, temperature, conductivity, waterlevel, oxygen and air pressure (not included). Up to eight of these modules can be connected to the system in any combination. Thus, it is possible, for example, to take multiple pH measurements (e.g. in a calcium reactor and in the aquarium) or even in several tanks quite independently of each other. Logical and easy operation. You can connect up to 4 socket panels, with 4 sockets each. You can programme up to 32 timer functions. The shortest switch interval is only 1 second long. Additional programmable functions are: interval functions, day/night-simulations, lunar-phase simulations, nocturnal reduction and pulsating simulations. Acoustic, visual and external alarm. Automatic sensor recognition and calibration with sensor test. Display of salt content, density or mS in seawater. Readings memory for 2000 chains of readings, buffered by storage battery. Al data can be transfered to a PC. With illuminated LC-Display. Technical data:
Dimensions: 24 x 13,5 x 3,5 cm
Power consumption: max. 5 watt
Processor: INTEL 80C535
Conventional memory: 128 kByte RAM (buffered)
Programme memory: 64 kByte Flash
Inputs: 8 sockets for any iks modules
Interface: Serial PC-Interface
Display: LC-Display (2x16 characters)
Outputs: 16 TTL switch outputs
5 Years guarantee
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518202
 |
You can continuously measure and regulate the pH-value of your aquarium with the help of this module. As the module is galvanically seperated from the basic system, the pH-value can also be measured at different points within a single water circuit without the individual sensors having an effect on each other.
Technical data:
Measuring range from pH 3 to pH 13
Resolution pH 0.01
Switch hysteresis: pH 0.05
Up to eight control processes can be programmed
Automatic or manual temperature compensation
Upper and lower alarm settings
Automatic calibration with sensor test
High-quality, maintenance-free laboratory pH-electrode
pH 4 and pH 7 calibration solutions included in the set.
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518203
 |
iks conductivity module for the IKS aquastar system. For the se in fresh and seawater.
technical data: high-quality, low-maintenance sensor comprising 4 platinum electrodes
4-conductor method for greatest presicion
Measuring range I from 10 µS to 1 mS, resolution 1 µS, switch hysteresis 10 µS
Measuring range II from 1mS to 100 mS, resolution 0.1 mS, switch hysteresis 0.2 mS
Automatic or manual temperature compensation
Automatic calibration with sensor test
Up to eight control process can be programmed
Upper and lower alarm settings
1 mS and 50 mS calibration solutions included in the set
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518204
 |
You can fully automatically ensure a constant water level in your aquarium using the water-level module (automatic level system). To float switch used is installed inside a casing protected from waves to prevent a pump switching on and off unnecessarily. In the unlikely event of the float switch failing, a timed alarm can be triggered to prevent flooding your living room. That means: if the specified level is not reached within a certain period of time, the pump will be pre-emptorily deactivated. The alarm time for this depends on the connected pump and can be easily set as the user wishes.
Technical data:
Switch hysteresis: approx. 2 mm
Up to eight control processes can be programmed
Timed alarm for maximum safety.
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518205
 |
You can use the air-pressure module to measure the absolute air pressure. Please note that it is the relative air pressure that given in, for example, weather reports or other media. The relative air pressure always refers to sea-level.This module was developed to automatically compensate for the realtively high dependency of the oxygen saturation in the water on air pressure. If the air pressure is not taken into consideration, it is quite feasible that errors in measurement can result of around 5% in the figure for oxygen saturation. Technical data:
Measuring range: 200 mbar to 1050 mbar
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518206
 |
You can continuously measure and regulate the redox potential of your aquarium with the help of these module. As the module is galvanically separated from the basic system, the redox potential can also be measured at different points within a single water circuit without the individual sensors having an effect on each other. You can choose between having the redox potential displayed on the iks aquastar im mV or as the rH-value.
Technical data:
Measuring and control range from -300 mV to +600 mV
Resolution: 1 mV
Switch hysteresis 5 mV
Up to eight control processes can be programmed
Upper and lower alarm settings
Automatic calibration with sensor test
High-quality, maintenance-free laboratory redox-electrode
230 mV calibration solution included in the set
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518207
 |
Using the oxygen module, the IKS aquastar can continuously measure and regulate the oxygen content in your fresh and seawater aquarium. And while it is doing so, you can have the oxygen content displayed in mg/l or the oxygen saturation in %. As the module is galvanically separated from the basic system, the oxygen content can be measured at different points in a water circuit without the individual sensors having an effect on each other.Technical data iks Oxygen module with sensor:
Measuring range from 0 to 150%, from 0 to 20 mg/l
Temperature range 0 to 50 °C
Accuracy when exposed to a flow of 2 cm/s ca. 5% below the real figure
Accuracy when exposed to a flow of 5 cm/s ca. 1% below the real figure
Switch hysteresis 2%
High-quality, low-maintenance Clark-measuring cells
Long sensor life (physically 2 years)
Calibration apperatus for precise calibration
Automatic or manual temperature compensation
Up to eight control processes can be programmed
Upper and lower alarm setting
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518208
 |
The temperature cab be precisely and continuously measured and controlled in your aquarium with these temperature module. You can stipulate a variety of settings for day and night, and for summer and winter, too. You van reproduce natural changes in temperature in your aquarium. The waterproof sensor also allows temperature measurement in the bed of the aquarium, for example.
Technical data:
Measuring range from 0 °C to 50 °C
Resolution: 0.05 °C
Switch hysteresis: 0.15 °C
Up to eight control processes can be programmed
Upper and lower alarm settings
Hight-quality, waterproof Pt1000 Class A sensor
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518209
 |
This 4-channel module allows the multitude of simulations of light and current that the IKS aquastar and iks aquastar midi systems provide to be used to their greatest effect. All you require to be able to dim fluorescent tubes are electronically dimmable ballast units (ECG e.g. Osram (Quicktronic®) , Philips (HF-Regulator) etc.).But current pumps with an output of up to several kilowatts can be controlled by means of this module and so-called frequency converters. This may be of interest particularly for larger systems.Technical data:
Black housing for external mounting
External dimensions : 9 cm x 10 cm x 2,6 cm
Connecting cable (for iks aquastar (L1, L2, L3 and/or L4) or iks aquastar midi (L1 and/or L2)), 6 feet long
8 terminals for connecting to the ballast unit (ECG) (2 per channel) Dimmable fluorescent lamps, for example, are Giesemann System 60 or the Breßlein T5 Lamps FQ
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518210
 |
By connecting this controller to the iks aquastar and iks aquastar midi systems, the readings can be sent to a mobile phone anywhere in the world by SMS. If a reading exceeds certain limits (alarm), the module automatically sends an SMS. In other words: you receive timely notification that enables you to take steps to prevent what could otherwise be worse damage. The latest readings can be called up from anywhere in the world at any time, provided, of course, your mobile phone has network connection.Message if mains power is cut, a life-saver! Simply plug the SMS-Controllers mains adapter into the socket to be monitored ! Devices such as a current detector, smoke, water, and motion sensors or even an alarm system can be connected to the SMS-Controllers digital inputs ... The SMS-Controller monitors everything you value and lets you to relax wherever you happen to be. By the way: You can also use the SMS-Controller as a stand-alone alarm centre! Message if mains power is cut, a life-saver! Simply plug the SMS-Controller's mains adapter into the socket to be monitored! Devices such as a current detector, smoke, water, and motion sensors or even an alarm system can be connected to the SMS-Controllers digital inputs . The SMS-Controller monitors everything you value and lets you to relax wherever you happen to be. Features:
-Remote alarm and remote enquiry via SMS
-Alarm if the relevant threshold values are attained, power cuts etc.
-Electrically separated, serial interface with iks aquastar or iks aquastar midi
-Connection ports for simultaneous operation of an external display panel and a PC
-Easy configuration by a PC
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518215
 |
Up to four switch sockets can be connected to the IKS aquastar system, each with four switch sockets. You can therefore individually control a total of 16 sockets.Applications:
Control processes (e.g. solenoid valve for pH-vaule, heating element for temperature)
Timers (e.g. various lamps, dosing pumps etc.)
Simulation of currents (e.g. current pumps)
Interval functions Technical data:
Inputs: Four opto-decoupled control inputs
Outputs: Four individually operable sockets (230 V~/max. 16A)
Breaking capacity: The maximum breaking capacity is 3600 watt, whereby it can also be connected via a single channel.
Technique: Relay. The switch state of the socket is show via LEDs.
Dimensions: 47 x 6,8 x 4,8 cm
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518216
 |
Up to four switch sockets can be connected to the IKS aquastar system, each with four switch sockets. You can therefore individually control a total of 16 sockets.Applications:
Simulation of currents
Sunrise and/or sunset
Lunar-phase simulation
Only electrical power consumers specially designed for operation with phase-angle control are to be connected. Technical data:
Inputs: Four opto-decoupled control inputs
Outputs: Four individually operable (dimmable) sockets
Breaking capacity: 250 watts per channel.
Technique: Phase-angle control
Dimensions: 48 x 8 x 5 cm
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518217
 |
With the external display it is possible to see different parameters and alarms away from the basic system.
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518218
 |
The clear presentation of this information and alarm panel for your IKS aquastar provides you with all need at a glance. Up to 4 readings are displayed at a time. You can see whether or not the readings are OK and in which direction a control function is activated at that particular moment. The integrated acoustic alarm notifies you immediately if anything steps out of line.The display panel has a serial interface and can be set at up to 30m away from the base system. However, an additional mains supply is necessary for greater distances. In contrast to LCD panels, this display panel can always be viewed easily from practically any angle, regardless of whether by day or by night. The installation kit, including a surround in a brushed stainless-steel look, supplied with the unit allows easy fitting into existing fascias and cabinets. Of course, wall-mounting is possible as well. To give the observer the best view possible of the display panel, it can be tilted along its horizontal axis. Technical data:
An elegant housing for flush fitting and external mounting
External dimensions without bezel : Hight x Width x Depth : 73 x 110 x 39 mm
Cut-out dimensions for flush fitting (with bezel) : Hight x Width : 74 x 111 mm
Clear characters
Blue front panel
Visible from all angles
All readings presented on a scrolling display
Active blue, luminized front screen
Integrated acoustic alarm
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518250
 |
The IKS aquastar midi is a comfortable measuring, regulation and control system. Up to two water values (e.g. pH and temperature) are permanently monitored by the iks aquastar midi and can be reulated via the switch sockets. A switch socket is already included in the basic version. You can connect up to eight socket panels (also dimmable) to the system. A two-line text display and a large LED display ensure a high level of operating comfort. The practical timing and interval functions are equivalent to the comprehensive and well-designed functions of the iks aquastar.Logical and easy operation. You can programme up to 32 timer functions. The shortest switch interval is only 1 second long. Additional programmable functions are: interval functions, day/night-simulations, lunar-phase simulations, nocturnal reduction and pulsating simulations. Acoustic, visual and external alarm. Automatic sensor recognition and calibration with sensor test. Readings memory for 4000 chains of readings, buffered by storage battery. Al data can be transfered to a PC.Technical data:
Dimensions: 17 x 10 x 3 cm
Power consumption: max. 5 watt
Processor: INTEL 80C535
Conventional memory: 128 kByte RAM (buffered)
Programme memory: 64 kByte Flash
Inputs: 2 BNC sockets for connecting a pH or redox electrode and a temperature sensor
pH: measuring range pH 3 to pH 13
Resolution pH 0.01
Temperature compensation automatic or manual
Switch hysteresis pH 0.05
Redox: measuring range -300 mV to +600 mV
Resolution 1 mV
Switch hysteresis 5 mV
Temperature: measuring range 5 °C to 50 °C
Resolution 0.05 °C
Switch hysteresis 0.15 °C
Interface: Serial PC-Interface
Display: LC-Display (2x16 characters) LED display
Outputs: 1 switch socket breaking capacity 230 V~/5A 8 TTL switch outputs for connecting the iks switch panel sockets
5 Years guarantee The delivery is without any electrodes or sensors !
|
|
pH/temperature
|
329.90 EUR
|
|
|
Redox/temperature
|
329.90 EUR
|
|
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518260
 |
The IKS aquastar alpha series provides greatest accuracy, easy of use and maximum reliability. With the interval function you can store readings and call them later directly on the display. With the iks aquastar alpha you can measure easy, quick and precisely the pH-value in the aquarium garden pond or swimming pool. The data memory stores up to 470 readings.An integrated alarm function assures greater safety. You can select an upper as well as a lower alarm setting. If, for whatever reason, one of these alarm settings is reached, the Power Station switch socket will be turned off. At the same time the alarm status will be appear on the display. The result is a reliable and effective prevention of damage. The system are available as portable hand-held instruments and as measuring/regulation systems with a switch socket and mains adapter for permanent operation. The battery-operated system can be extended, even at a later date, to form a measuring and regulation system designed for permanent operation, simply by connecting the optionally available Power Station. Technical data: Dimensions: 14x8x2,7 cm
Display: LCD 4-digit
Power supply: 9 V-
Measuring-/control range: pH3-13
Resolution: pH 0.01
Operating temperature: 0-50 °C
Temperature compensation: manual
Switch hysteresis: freely adjustable (but >=pH 0.05)
PC interface
Switch output: 1500 W (only in conjuction with the power station)
Calibration: semi-automatic
Data memory for 470 readings
Sensor: Low-maintenance, laboratory electrode
Calibration solutions included
Alarm function
|
|
hand-held system
|
219.90 EUR
|
|
|
Measure/Regulation system
|
279.90 EUR
|
|
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518265
 |
The IKS aquastar alpha series provides greatest accuracy, easy of use and maximum reliability. With the interval function you can store readings and call them later directly on the display. With the iks aquastar alpha you can measure easy, quick and precisely the pH-value in the aquarium garden pond or swimming pool. The data memory stores up to 470 readings.An integrated alarm function assures greater safety. You can select an upper as well as a lower alarm setting. If, for whatever reason, one of these alarm settings is reached, the Power Station switch socket will be turned off. At the same time the alarm status will be appear on the display. The result is a reliable and effective prevention of damage. The system are available as portable hand-held instruments and as measuring/regulation systems with a switch socket and mains adapter for permanent operation. The battery-operated system can be extended, even at a later date, to form a measuring and regulation system designed for permanent operation, simply by connecting the optionally available Power Station. Technical data: Dimensions: 14x8x2,7 cm
Display: LCD 4-digit
Power supply: 9V-
Measuring-/control range: -300 to +600 mV
Resolution: 1 mV
Operating temperature: 0-50 °C
Switch hysteresis: freely adjustable (but >=5 mV)
PC interface
Switch output: 1500 W (only in conjuction with the power station)
Calibration: semi-automatic
Data memory for 470 readings
Sensor: Low-maintenance, laboratory electrode
Calibration solutions included
Alarm function
|
|
hand-held system
|
235.90 EUR
|
|
|
Measure/Regulation system
|
299.90 EUR
|
|
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518270
 |
The IKS aquastar alpha series provides greatest accuracy, easy of use and maximum reliability. With the interval function you can store readings and call them later directly on the display. With the iks aquastar alpha you can measure easy, quick and precisely the pH-value in the aquarium garden pond or swimming pool. The data memory stores up to 470 readings.An integrated alarm function assures greater safety. You can select an upper as well as a lower alarm setting. If, for whatever reason, one of these alarm settings is reached, the Power Station switch socket will be turned off. At the same time the alarm status will be appear on the display. The result is a reliable and effective prevention of damage. The system are available as portable hand-held instruments and as measuring/regulation systems with a switch socket and mains adapter for permanent operation. The battery-operated system can be extended, even at a later date, to form a measuring and regulation system designed for permanent operation, simply by connecting the optionally available Power Station. Technical data: Dimensions: 14x8x2,7 cm
Display: LCD 4-digit
Power supply: 9V-
Measuring-/control range: 8 to 50 °C
Resolution: 0.1 °C
Switch hysteresis: freely adjustable (but >=0.2 °C)
PC interface
Switch output: 1500 W (only in conjuction with the power station)
Data memory for 470 readings
Sensor: waterproof sensor
Alarm function
|
|
hand-held system
|
219.90 EUR
|
|
|
Measure/Regulation system
|
279.90 EUR
|
|
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518275
 |
The Power-Station lets you extend the IKS aquastar alpha manual instruments to become full measuring and regulation systems. The station is a prerequisite for permanent measuring and control processes. Using this socket you can control heating units, coolers, solenoid valves, nitrate filters, ozonisators and many more.Technical data:
Dimensions: 24 x 6,5 x 4,5 cm
Breaking capacity: max. 1150 watts
Wall bracktes included
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518300
 |
Technical data:
black polysulfone shaft
Shaft lenght: 120 mm
Shaft diameter: 12 mm
Diaphragm: Ceramic
pH-range: 0...14
Electrolyte: Gel
Temperatre range: 0...80 °C
Cable: 2 m low-interference, coaxial cable
Connection: BNC plug
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518301
 |
Technical data:
black polysulfone shaft
Shaft lenght: 120 mm
Shaft diameter: 12 mm
Diaphragm: Ceramic
Electrolyte: Gel
Temperatre range: 0...80 °C
Cable: 2 m low-interference, coaxial cable
Connection: BNC plug
Platin cap diameter: 6 mm
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518302
 |
Technical data:
Measuring range 0 to 150 %, 0 to 20 mg/l
Accuracy under exposure to current of 2cm/s ca. 5% below real value
Accuracy under exposure to current of 2cm/s ca. 5% below real value
High-quality, low-maintenance Clark measuring cell
Temperatre range: 0...50 °C
Cable: 2 m low-interference, coaxial cable
Connection: BNC plug
incl. Calibration equipment
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518303
 |
Technical data:
Cable: 3 m long, black supply line
Sensor element: Pt1000 Class A
Connection: BNC plug
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518305
 |
With this sensor holder, you can attach up to four sensors to your aquarium.The holder is suitable for vertical as well as horizontal fitting. For wall-thickness up to 16 mm.
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518320
 |
How accurate a measurement is depends, among other factors, greatly on the calibration. Precondition for good calibration is precision calibration-solution. Available as pH 4, pH 7 or pH 9, with 50 ml content/each.
|
|
pH 4
|
5.99 EUR
|
|
|
pH 7
|
5.99 EUR
|
|
|
pH 9
|
5.99 EUR
|
|
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518325
 |
How accurate a measurement is depends, among other factors, greatly on the calibration. Precondition for good calibration is precision calibration-solutions. Content: 50 ml Redox calibration solution 230 mV.
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518330
 |
How accurate a measurement is depends, among other factors, greatly on the calibration. Precondition for good calibration is precision calibration-solutions. Available1 mS/cm (1000 µS) oder 50 mS/cm, with 50 ml content/each.
|
|
1 mS/cm
|
5.99 EUR
|
|
|
50 mS/cm
|
5.99 EUR
|
|
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518340
|
IKS BNC - cable for the connection of the IKS electrodes. Available in lenghts with: 2.0 m, 5.0 m and 10.0 m.
|
|
2 m
|
23.79 EUR
|
|
|
5 m
|
34.90 EUR
|
|
|
10 m
|
37.90 EUR
|
|
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518346
 |
IKS data cable for the connection of the iks system with the serial interface of the PC. 9-pol. link. Lenght: 3 meters.
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518350
|
Cable extension for the data cable to the PC and the cable to the external display. Available with 2.0 m, 5.0 m and 10.0 m lenght.
|
|
2,0 m
|
24.90 EUR
|
|
|
5,0 m
|
34.90 EUR
|
|
|
10,0 m
|
47.90 EUR
|
|
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
518360
|
IKS data cable for switch socket cable as extension, available in 2 m, 5 m and 10 m lenght
|
|
2,0 m
|
24.90 EUR
|
|
|
5,0 m
|
34.90 EUR
|
|
|
10,0 m
|
47.90 EUR
|
|
|
| Prices incl. German VAT additional
Shipping costs |
| More informations
and ordering >>> |
| |
our articles