| Using the oxygen module, the IKS aquastar can continuously measure and regulate the oxygen content in your fresh and seawater aquarium. And while it is doing so, you can have the oxygen content displayed in mg/l or the oxygen saturation in %. As the module is galvanically separated from the basic system, the oxygen content can be measured at different points in a water circuit without the individual sensors having an effect on each other. Technical data iks Oxygen module with sensor:
Measuring range from 0 to 150%, from 0 to 20 mg/l
Temperature range 0 to 50 °C
Accuracy when exposed to a flow of 2 cm/s ca. 5% below the real figure
Accuracy when exposed to a flow of 5 cm/s ca. 1% below the real figure
Switch hysteresis 2%
High-quality, low-maintenance Clark-measuring cells
Long sensor life (physically 2 years)
Calibration apperatus for precise calibration
Automatic or manual temperature compensation
Up to eight control processes can be programmed
Upper and lower alarm setting |
 |
IKS Oxygen module with sensor