With the aqualine C, a new dimension has arrived in aquarium measurement and control. It provides a complete solution for the control of all major aquarium parameters and is operated by microprocessor.
Large LED color display (Graphics Display) in an elegant aluminium frame.
Basic Box with connections for the probes
Power Box with electrical conections for four seerate functions
Remote Control (to select the menus).
Also included in the basic set are one each of H, Redox (ORP), temperature and conductivity probes, plus two float switches.
Channels:pH/Redox (ORP): 4 Channels for pH and Redox probes, which can be programmed as needed (2 x pH and 2 x Redox).
Temperature: used for heating and cooling. Can be programmed to lower the temperature during the night.
Conductivity: used to measure fresh or salt water up to 70 mS
Level: 4 channels for float switches. They can be programmed for 2 circuits. A relationship between conductivity and water level can be set.
Additional functions:
Timer: 4 timer channels can be programmed as time switches, or as interval controllers.
Statistics: The data measured over the previous four weeks are saved and can be displayed graphically on the screen enabling the monitoring of the daily fluctuations of the measured aquarium data.
Options: Additional Power Boxes can be added (to a total of 8 units) increasing the total number of available output cahnnels to 32.
An RS 232 connection for the connect to an IBM-compatible PC is included. |
 |
ab Aqua Medic aqualine C