sera LED X-Change Tube neutral brilliant white
The very bright, neutral white light provides plenty of luminous flux also in deep aquariums, increases the contrast impression and is excellently suited for lighting the foreground.
+ very bright, neutral white light
+ true color light for freshwater and marine aquariums
+ approx. 3850 K depending on the dimming state
+ improves color contrasts
+ dimmable in combination with the sera LED Digital Dimmer
+ can be installed in existing T5 and T8 lighting units
+ safe up to 64% energy costs
+ 20V low voltage
+ long lifetime, approx. 30,000 hours
+ excellent light quality
sera LED X-Change neutral brilliant white 360: length: 360 mm, replaces 15 W T8 tubes und 24 W T5 tubes, Lumen: 605, power consumption: 7 W
sera LED X-Change neutral brilliant white 520: length: 520 mm, replaces 18 W T8 tubes und 28 W T5 tubes, Lumen: 765, power consumption: 8.2 W
sera LED X-Change neutral brilliant white 660: length: 660 mm, replaces 25 W T8 tubes und 35 W T5 tubes, Lumen: 1053, power consumption: 10.2 W
sera LED X-Change neutral brilliant white 820: length: 820 mm, replaces 30 W T8 tubes und 35 W, 39 W T5 tubes, Lumen: 1197, power consumption: 12.3 W
sera LED X-Change neutral brilliant white 965: length: 965 mm, replaces 38 W T8 tubes und 54 W T5 tubes (104.7 cm), Lumen: 1358, power consumption: 14.8 W
sera LED X-Change neutral brilliant white 1120: length: 1120 mm, replaces 36 W T8 tubes und 54 W T5 tubes (120 cm), Lumen: 1725, power consumption: 17.8 W
The new sera LED X-Change System allows for easy conversion from fluorescent tubes to modern low voltage LED aquarium lighting. Not only saving energy costs, excellent light quality and longevity are arguments for the enviromentally friendlier light source, but the sera LED X-Change System even allows changing light scenarios in an uncomplicated way. Combination with the sera LED Digital Dimmer does not only generate a difference in brightness, but also allows for a sunrise and sunset scenario by shifting the light color towards red light components.
The sera LED X-Change Tubes can be installed into the existing fixtures of the previously used fluorescent tube using an separate available adaptor for T5 or T8. The T5 or T8 fixtures are disconnected for this purpose and only serve for keeping the tube in place. Power supply is achieved via a low voltage cable and a 20 V ballast (the ballast is not included). Several sera LED X-Change tubes can be interconnected via the sera LED Triple Cable and a ballast (take care of the total amperage!). It is of course also possible to install the waterproof sera LED X-Change Tubes individually.Do you have questions about this article ?