 |
-
Hydor Thermostat (Hydroset) is an electronic thermostat with LCD-Display for the control of water temperature in aquarium or air temperature in terrariums. It is very easy to use and it can be connected to any heating cable, unregulated heater, heating mat or other heater with a maximum power of 500 W. The set temperature is shown in the right-hand side of the display, while the temperature measured by the probe is shown in the left-hand side of the display. To set Hydor Thermostat, turn the regulation knob until the required temperature is shown. Should the temperature measured by the probe turn out to be lower than the value set, Hydor Thermostat Will automatically start the connected heating element (heating cable, mat or heater) and will keep it on until the set temperature is reached. During the warm-up phase, this symbol will appear in the lower left-hand side of the display: 0. The set temperature must be between min. 5° C and max. 35° C (41° F - 95° F).
Hydor Thermostat 500 W with Display
+ maximum power: 500 W
+ LCD Display with both temperatures shwon
+ regulating temperature range: 5°C to 35°C (41°F - 95° F)
+ EURO plug
+ cable length temperature sensor: 1.90 m
+ incl. suction cups
Manual Hydor Thermostat 500 W with Display -
Reviews for Hydor Thermostat 500 W with Display:
Write a reviewMarko S. at 19.02.2021:
Does what it promises.
Your question: Hydor Thermostat 500 W with Display
- Marko S. wrote about Hydor Thermostat 500 W with Display in 2021:
Does what it promises.
