Aqua Medic DC Runner 1.3

✮ 5.000 active customers in UK!

The Aqua Medic DC Runner 1.3 is a versatile pump for fresh and marine water aquaria, with adjustable output and control options.

Actual product may vary from the image shown.

Overview

Technical specifications Aqua Medic DC Runner 1.3:
transparency pump housing
0-10 V connection for external control
Pump output: up to 1200 l/h
max. pump height: 1.5 m
max. Power consumption: 12 W
Power supply pump: 24 V
Power supply transformer: 110-240 V/50-60 Hz
Connector suction side: 25 mm
Connector pressure side: 20 mm
Protection rating: IPX8
Dimensions incl. basket: 125x60x85 mm
Dimensions without basket: 90x60x85 mm
suitable for fresh and marine water
can be installed fully submerged or out of water

The Aqua Medic DC Runner 1.3 is a powerful universal pump for use in fresh and marine water aquaria. The Aqua Medic DC Runner is a magnetically coupled current pump and have a fully encapsulated synchronous motor. All materials are salt-water resistant. The pump is operated at 24 V DC safety voltage, with the transformer included. The Aqua Medic DC Runner 1.3 is controlled via Aqua Medic DC Runner Controller which allows for running a variety of different levels.In addition to control via controller, control via app with smartphone or tablet is possible. The Aqua Medic DC Runner pump is suitable for installation under water and out of water.

Aqua Medic DC Runner Controller The included DC Runner Controller is switched between power supply and pump to adjust the output. The power can be adjusted by pressing the +/- buttons, the level is displayed by LED. If you press the button -FEED-, the output will stop for 10 minutes. There is an automatic shut off if there is no water for 2 minutes. An extension cable with 1.80 m in the length is optionally available. With this cable you can extend the cable between pump and controller.

Aqua Medic DC Runner 1.3

for use as a circulation or current pump in salt or freshwater aquaria
incl. Controller for adjusting the water output
0-10 V-connection for external control
control and programming via App (iTunes and Google Playstore) or manually via the controller
ULTRA SILENT due to optimized control electronics
rugged pump housing
power-saving D/C motor 24 Volt, high efficiency
polished ceramic shaft and bearings for quiet operation and low maintenance
submerged and non-submerged use is possible

Free bonus item inclusive:
UK-Euro Plug Adaptor for all orders from the UK.

Manual Aqua Medic DC Runner 1.3

Brand:

AB Aqua Medic GmbH

Contact according to Art. 19 EU GPSR

AB Aqua Medic GmbH
Gewerbepark 24
49143 Bissendorf
info@aqua-medic.de

Reviews from our customers:
Igor F. wrote about Aqua Medic DC Runner 1.3 in 2023:
I am very pleased with choice i have made and bought this pump. Pump is completely silent and have enough power for mine 55g mixed aquarium. WiFi feature is very handy and works nicely, it is also simple to connect and to create program with variable flow through the day with free app.

Customer questions to this product:
I would like to buy your pump. In the manual for the pump I saw that it should operate at minimum 60% power to prevent damage. Please explain what is this setting on the controller? Since I need smaller capacity (300-400L per hour) what will happen if the pump operates at lower level of power?
You can reduce the pump power with the Controller to approx. 40-50%, not more. The pump is cooled by water. If the troughflow is to low, the pump can be overheated.