Econlux DRV2 Universal Driver is the power supply for all Econlux SolarStinger/SolarRaptor LED lightings. Using the separate available Y-cables there is the possibility to connect more than one LED lighting to an power supply. But please take care of the total power consumption of the connected LED lightings.
Econlux SolarStinger CON1 is the controller for all SolarStinger and SolarRaptor, which are operated with a DRV-power supply unit. The CON1 controller has 3 outputs with 5 channels each, which can be individually controlled and assigned. With the optional CON Booster, the maximum input power of 180 W can be extended as desired.
Econlux SolarStinger SunStrip 35 Fresh is a LED-light for all fresh water aquariums. Through ist reflecting lights aquarium water appears nearly alive. Like in nature, sun curl effects appear and increased colour brilliance is given.
With the new SunStrip III, Econlux has technically upgraded and further improved the proven LED luminaire. The light spectrum has been optimized and the luminous efficacy significantly increased with lower energy consumption. The combination of, evenly distributed, warm white and cool white LEDs not only bring more luminosity into your aquarium, they also provide a natural light climate.
Econlux SolarStinger SunStrip Y Cable for all Econlux DRV power supplys. With the Y-cable it is possible to connect several SolarStinger/SolarRaptor 6-pin products simultaneously towards a DRV power supply. It is important that the overall voltage of the connected devices does not overstep the initial power output of the DRV power supply.
With the Econlux SolarStinger SunStrip Bridge Holder 35, the SunStrip 35 can be placed on the edge of the aquarium. The supplied feets (90 °) are used for this purpose. When using cover plates on the aquarium or on the terrarium it is possible to simply place the SunStrip LED on the glass.
With the Econlux SolarStinger SunStrip T5 Flex Holder, the SunStrip LED can be inserted into an existing T5 fluorescent lightbar. The Flex Holder can be moved freely in the profile of the LED and thus the desired length can be set exactly. Furthermore, the flex holder is rotatable so that the LED can be rotated in the desired direction, e.g.
With the Econlux SolarStinger SunStrip T5 Holder it is possible to convert an existing T5 lighting system into the SolarStinger SunStrip LED lighting. After attaching the T5 Holder on the SunStrip, the SunStrip and the Holder are mounted like a fluorescent tube. Thus the aquarium cover can still be used.
Through the Econlux SolarStinger SunStrip Z-Holder one can place the SunStrip simply on top of an open aquarium or screw it on a carrier plate. Due to the form of the Z Holders an adequate air circulation around the LED bar is given.
The Econlux SolarStinger SunStrip Bridge Holder is only suitable for open aquariums. The holder is placed on aquarium glasses, which have glass strength of max. 12 mm and which are fixed through polyamide-screws.
Econlux SolarStinger SunStrip Plate Holder is needed to fix the Extender Plate on the SolarStinger/SolarRaptor SunStrip. It is also utilized as a spare part for the Bridge Holder and TopRail 300/500.
The Econlux SolarStinger SunStrip Bridge Clip is only suitable for open aquariums. The holder is placed on aquarium glasses, which have glass thickness from 2 - 15 mm and which are fixed through polyamide-screws and a clamp.
Econlux SolarStinger SunStrip Top Rail Set connects two SunStrip LED beside each other and enables the intsllation hanging from the ceiling. The Top Rail Set is available in two sizes: 300 mm and 500 mm.
Econlux SolarStinger SunStrip Jewel Cover is an aluminum profile for the aquarium covers of the company JUWEL. With this profile, the Juwel cover can be easily and quickly converted to the SolarStinger SunStrip LED lighting. The original luminaire is removed from the cover and replaced with the matching SunStrip Juwel Cover.