Pumps PVC Fittings Adaptor union

PVC Ball Valve

with threaded connector, removable
16 - 110 mm sizes
glue socket on both sides

With pieces made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The different fittings are matched to each other and therefore fit together perfectly. In addition to elbows, pipes and bends, there are various screw joints and threaded pieces available for the permanent connection of pumps and filters.

PVC Ball Valvewith threaded connector, removable
16 - 110 mm sizes
glue socket on both sides
Top Sellerfrom 6.50 €^*

PVC Ball Valve CHwith threaded connector, removable
16 - 63 mm sizes
glue socket on both sides
from 12.85 €^*

Preview

Spare part set PVC Ball Valve CH

spare part set consists of 3 pieces

Spare part set consists of 3 pieces for the ball valve CH: coupling nut socket sealing ring.

from 3.99 €^*

Preview

PVC 3-Way Ball Valve T-Hole

with threaded connector, removable

With socket on every site. Removable. This ball shut-off valve is equipped with adhesive sockets on all 3 sides and can also be removed by means of the screw fittings.

from 32.85 €^*

Preview

PVC Check valve

sockets on every site
pressure resistant up to 16 bar

4.0 (1)

PVC fittings make it easy to create pipework for aquariums or entire systems. The different fittings are designed to work together perfectly. In addition to elbows, pipes and bends, there are a variety of screw fittings and threaded pieces to connect pumps and filters.

from 76.95 €^*

Preview

PVC Reducing bash short

reducing ring short
pressure resistant up to 16 bar

5.0 (1)

With PVC fittings you can realise a complete pipe system for your aquarium. You can connect pumps, filters and more than one aquarium to a system. All PVC fittings will be glued with a special PVC glue.

from 0.65 €^*

Preview

PVC Reducing bash long

with glue connector, pressure resistant up to 16 bar

5.0 (1)

from 1.95 €^*

Preview

VDL PVC Hose Nozzle with fusion spigot

with fusion spigot

5.0 (2)

PVC fittings allow you to create a complete piping system for your aquarium. You can connect pumps, filters and more than one aquarium to a system. All PVC fittings are glued with a special PVC glue.

VDL PVC Hose Nozzle with fusion spigotwith fusion spigotTop Sellerfrom 1.29 €^*

VDL PVC Hose Nozzle with male threadBSP male threadfrom 2.19 €^*

PVC Hose Nozzle with union nutwith union nut and rubber washerfrom 3.79 €^*

Preview

PVC Adaptor union with fusion spigot

with fusion spigots on every side
in different sizes

5.0 (1)

PVC fittings can be used to easily create piping for aquariums or entire systems. The various fittings are matched to each other and therefore fit together perfectly. In addition to elbows, pipes and bends, various screw connections and threaded pieces are available with which pumps and filters can be firmly connected.

PVC Adaptor union with fusion spigotwith fusion spigots on every side
in different sizes
Top Sellerfrom 4.39 €^*

PVC Adaptor union with female threadwith female thread on one sidefrom 5.95 €^*

PVC Adaptor union with male threadwith male thread on one sidefrom 5.89 €^*

Preview

PVC Cross Piece

4x, adhesive socket, up to 16 bar

PVC Cross Piece4x, adhesive socket, up to 16 barTop Sellerfrom 3.19 €^*

PVC Cross Piece reducing4x, adhesive socket, reducing, up to 16 barfrom 9.95 €^*

Preview

PVC Tee 45°

pressure resistant up to 16 bar

5.0 (1)

With fittings made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The various fittings are matched to each other and thus fit together perfectly. In addition to elbows, pipes and bends, various fittings and threaded pieces are available, with which pumps and filters can be firmly connected.