Overview
Seachem HyperSorb
- High capacity organic waste removal
- Synthetic adsorbent
- Economical carbon substitute
- No impact on pH
- minimal impact on trace elements
Use of Seachem HyperSorb
Use in a filter net bag. Each 250 ml treats up to 300 L aquarium water. Rinse before use. Exhaustion is indicated by a pronounced discoloration of the beads from yellow to deep brown.
Regeneration: Soak in a 1:1 bleach to water solution for 24 hours in a non-metallic container in a well ventilated area and away from children. Use regular 8.25% hypochlorite household bleach (non-scented, no dyes, do not use a splash-less bleach). Rinse well, then soak for 8 hours with a solution containing 4 tablespoons of Seachem Prime, or equivalent dechlorinator per cup of water. Rinse well. For freshwater use, soak for 4 hours with a solution containing 2 tablespoons of buffer per cup of water (Discus Buffer, Neutral Regulator). Original color and full activity should now be restored and Seachem HyperSorb is ready for reuse. Caution: some slime coat products may permanently foul Seachem HyperSorb and render regeneration difficult. Do not reuse if odor of bleach/chlorine is detectable. In case of doubt, soak beads in small quantity of water and test for residual chlorine with a chlorine test kit.
E.A. European aquaristics GmbH
E.A. European aquaristics GmbH
Deichstraße 189
27804 Berne
info@europeanaquaristics.com

