Aqua Medic Heat Controller duo II

The temperature controller Aqua Medic Heat Controller duo II is used for controlling heaters and under gravel heating systems at the same time. With this unit, you can continuously measure and control the water temperature of your aquarium water and ensure a flow of the under gravel. Measuring and switching accuracy is 0.1 °C. The control range varies from 0 - 50 °C, the set value is in 0.1 °C increments and is controlled exactly to 1 °C. The maximum load for the heating systems and under gravel heater is 1,200 watts. Because of the integrated double socket it is possible to connect a heater and an under gravel heating system simultaneously. The Aqua Medic Heat Controller duo is supplied with a temperature probe attached. The LCD display provides instant information on the current temperature, time and state of the connected units. The heating cable is controlled by a timer, the on/off time can be programmed. If the set value is not reached, the under gravel heater is switched on. To avoid overheating, both sockets switch off as soon as the set value is reached.

Technical specifications Aqua Medic Heat Controller duo II
display: 0.1 °C
measurement range: 0.0 up to 50.0 °C
resolution: 0.1 °C
loading capacity of contact: 1200 W
adjustment range: 0 - 50 °C
adjustment accuracy: +/- 1 °C
battery buffer for saving the data at power failure
dimensions control panel: 110x50x20 mm