The Aqua Medic Top End Filter
is a ready to use demineralization filter for removing silicate, nitrate and other ions from osmosis water. Since silicate and nitrate are very small ions, they are held back to a lesser extent by osmosis systems. The Aqua Medic Top End Filter is placed directly behind the reverse osmosis unit so that any remaining silica is removed from the ultrapure water. The colour indicator in the ion exchange resin shows when the filter material is worn. The binding capacity is exhausted with approx. 1,800 l water flow (depending on the water quality).
High levels of silica (silicates) in tap water are often a problem in the aquarium hobby despite the use of the most modern reverse osmosis systems. Even with retention rates of up to 99%, a residual silica concentration often remains in the pure water that can lead to problems with diatoms especially in saltwater aquaria.
Included in shipment:
+ filter housing filled with ion exchange resin (incl. colour indicator)
+ wall bracket
+ bracket for attaching to an existing reverse osmosis filter (e.g. easy line)
+ high-quality 6 mm connection fittings
+ grid plate with microfilter
+ microfilter sponge
- 50 cm hose
technical data Aqua Medic Top End Filter Manual Aqua Medic Top End Filter
height: app. 330 mm
diameter: app. 71 mm
volume: 500 ml
connection thread: ¼“
connections: ¼“ fitting for 6 mm osmosis hose
Signal world: Danger
H318 Causes serious eye damage.
P264 Wash … thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/…
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P501 Dispose of contents/container in accordance with national regulations
Your question: Aqua Medic Top End Filter