Arka myAQUA 400 Resin Filter for the Arka myAQUA 400 Reverse Osmosis System.
NEW!
Actual product may vary from the image shown.
-
Arka myAQUA 400 Resin Filter for the Arka myAQUA 400 Reverse Osmosis System. The Arka myAQUA 400 resin filter safely and effectively removes even the finest residues of silicate, nitrate and many other dissolved organic and inorganic substances (TDS) and is ideal as an extension to the ARKA myAQUA 400 (used instead of the C2 carbon filter). The Arka myAQUA 400 resin filter contains cationic and anionic resin (H+ and OH- in a 1:1 ratio) and enables the production of pure water with an average conductivity of ~ 0.1 µS/cm.Brand:
ARKA Biotechnologie GmbHPrecaution:
Signal world: Danger
Hazard statements:
H318 Causes serious eye damage.
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/
P305+P351+P38+P310
P501 Dispose of contents/container in accordance with national regulations
-
-
What is the Arka myAQUA 400 Resin Filter?
The Arka myAQUA 400 Resin Filter is an ion exchange filter used to produce demineralized water for aquariums, reverse osmosis systems, or laboratory use.What is the resin filter used for?Ar: It is used to remove remaining minerals, silicates, and other dissolved substances after reverse osmosis.Qn: How does the filter work?
The filter contains mixed-bed resin that exchanges cations and anions, producing nearly pure H2O.Where is the resin filter located?
The resin filter is used as the last stage instead of the carbon filter C2.When should the resin be replaced?
The filter should be changed when the TDS (total dissolved solids) value rises, typically above 0 ppm.Can the filter be reused?
No, the cartridge must be replaced regularly.Is the filtered water suitable for drinking?
No, the filtered water is not intended for human consumption.