The TUNZE RO Water Controller is an automatic water level controller used in the pure-water container of TUNZE RO station. The controller is also suitable for other water tanks or can be connected to an automatic refill system. It consists of a controller, two sensors, a water valve and an 11 V power supply unit. Depending on the demand, the water valve can be replaced by switched socket outlet 3150.11 for mains operation. If the position of the sensors of the RO water controller is reversed, the switched socket outlet 3150.11 and a pump can be used to empty a water tank, and thus it can also be used for automatic filling or emptying of tanks. By means of a combination of two units, a water changing system can be built.
Function of the TUNZE RO Water Controller 8555:Do you have questions about this article ?
TUNZE RO Water Controller 8555 uses two sensors (float switches) i.e. one sensor to switch on the valve and to monitor the water level (LED Water On) and one sensor for switching the system off (LED Water Off). The controller also contains an electronic time monitor, which stops the valve after twelve hours (default condition) or twenty-four hours of continuous operation (time out). This may prevent the container from flowing over when a sensor is blocked, for example. After pressing the Reset button, the water controller is operational again. TUNZE No. 8555.000