PVC Table Duct with fusion spigot

Overview

With fittings made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The different fittings are matched to each other and therefore fit together perfectly. In addition to elbows, pipes and bends, there are various screw joints and threaded pieces available for the permanent connection of pumps and filters. The individual parts are permanently joined together with PVC adhesive.

PVC Table Duct with fusion spigot The bushing (also called tank fitting) represents the connection of the aquarium to the pipe system. With the adhesive socket on one side and the adhesive sleeve on the other side, the tank is firmly connected to the pipe system. The aquarium connector is supplied complete with plastic washer and sealing ring. The connection is made of injection molding and pressure resistant up to 16 bar.

available in the following sizes:
- 16/20 mm x 1/2 inch
- 20/25 mm x 3/4 inch
- 25/32 mm x 1 inch
- 32/40 mm x 1 1/4 inch
- 40/50 mm x 1 3/4 inch
- 50/63 mm x 2 inch
- 50/63 mm x 2 1/4 inch
- 63/75 mm x 2 1/2 inch
- 75/90 mm x 3 inch
- 90/110 mm
- 110/125 mm

Table duct A

Size	d1	d2	d3	Z1	Z2	B	C	D	S
16/20x1/2"	16 mm	20 mm	1/2"	13 mm	0-23 mm	16 mm	19 mm	16 mm	22 mm
20/25x3/4"	20 mm	25 mm	3/4"	13 mm	0-23 mm	16 mm	19 mm	42 mm	32 mm
25/32x1"	25 mm	32 mm	1"	15 mm	0-23 mm	19 mm	22 mm	45 mm	40 mm
32/40x1 1/4"	32 mm	40 mm	1 1/4"	17 mm	0-24 mm	22 mm	26 mm	47 mm	50 mm
40/50x 1 3/4"	40 mm	50 mm	1 3/4"	19 mm	0-21 mm	26 mm	31 mm	48 mm	60 mm
50/63x2"	50 mm	63 mm	2"	21 mm	0-21 mm	31 mm	38 mm	52 mm	69 mm
50/63x2 1/4"	50 mm	63 mm	2 1/4"	21 mm	0-21 mm	31 mm	38 mm	52 mm	76 mm
63/75x2 1/2"	63 mm	75 mm	2 1/2"	23 mm	0-23 mm	38 mm	44 mm	53 mm	85 mm
75/90x3"	75 mm	90 mm	3"	26 mm	0-26 mm	44 mm	51 mm	56 mm	100 mm