sera LED X-Change Tube daylight sunrise

1. daylight tube for all freshwater aquariums
   
2. 6,000 to 8,000 K depending on the dimming state
   
3. enables sunrise and sunset scenario in combination with the LED Dimmer
   
4. can be installed in existing T5 and T8 lighting units
   
5. safe up to 64% energy costs
   
6. 20V low voltage
   
7. long lifetime, approx. 30,000 hours
   
8. excellent light quality
   
9. cable length approx. 1.5 m
   

sera LED X-Change daylight sunrise 360: length: 360 mm, replaces 15 W T8 tubes und 24 W T5 tubes, Lumen: 388, 5.5 W
sera LED X-Change daylight sunrise 520: length: 520 mm, replaces 18 W T8 tubes und 28 W T5 tubes, Lumen: 747, 10.7 W
sera LED X-Change daylight sunrise 660: length: 660 mm, replaces 25 W T8 tubes und 35 W T5 tubes, Lumen: 1081, 14 W
sera LED X-Change daylight sunrise 820: length: 820 mm, replaces 30 W T8 tubes und 45 W, 39 W T5 tubes, Lumen: 1103, 15.6 W
sera LED X-Change daylight sunrise 965: length: 965 mm, replaces 38 W T8 tubes und 54 W T5 tubes (104.7 cm), Lumen: 1243, 16.9 W
sera LED X-Change daylight sunrise 1120: length: 1120 mm, replaces 36 W T8 tubes und 54 W T5 tubes (120 cm), Lumen: 1252, 21 W
sera LED X-Change daylight sunrise 1420: length: 1420 mm, replaces 58 W T8 tubes und 80 W T5 tubes, Lumen: 1615, 22 W

The new sera LED X-Change System allows for easy conversion from fluorescent tubes to modern low voltage LED aquarium lighting. Not only saving energy costs, excellent light quality and longevity are arguments for the enviromentally friendlier light source, but the sera LED X-Change System even allows changing light scenarios in an uncomplicated way. Combination with the sera LED Digital Dimmer does not only generate a difference in brightness, but also allows for a sunrise and sunset scenario by shifting the light color towards red light components.

The sera LED X-Change Tubes can be installed into the existing fixtures of the previously used fluorescent tube using an separate available adaptor for T5 or T8. The T5 or T8 fixtures are disconnected for this purpose and only serve for keeping the tube in place. Power supply is achieved via a low voltage cable and a 20 V ballast (the ballast is not included). Several sera LED X-Change tubes can be interconnected via the sera LED Triple Cable and a ballast (take care of the total amperage!). It is of course also possible to install the waterproof sera LED X-Change Tubes individually.