TECO Aquarienkühler DI 1000

The TECO DI 1000 is a high-performance drop-in cooler for aquariums, aquaponics, and hydroponics systems. Cooling is not achieved through traditional water flow through the unit, but rather via a titanium cooling coil that is placed directly in the water. This makes it particularly easy to integrate the cooler into existing systems without requiring hose connections, piping, or modifications to the water circuit.

The drop-in technology is especially practical for technical tanks, sump systems, filter chambers, or custom setups. The cooling coil is fully inserted into the water-carrying section, the cooler is then electrically connected and controlled via the integrated thermostat. This makes the DI 1000 a highly flexible solution for aquarium setups that require reliable temperature reduction but where no additional piping is to be installed.

The heat exchanger is made of titanium, making it suitable for use in aquariums. According to the manufacturer, the TECO DI 1000 is designed for aquariums up to 1,000 liters. This specification is based on an ambient temperature of 30 °C, a water temperature of 25 °C, and a heat load of 0.2 W/L. For higher heat inputs or lower desired water temperatures, the actual aquarium size must be adjusted accordingly.

TECO Aquarium Chiller DI 1000

1. Drop-in chiller for aquariums, aquaponics, and hydroponics
   
2. Titanium heat exchanger directly in the water
   
3. No water-carrying connections required on the chiller
   
4. Easy installation without modifying the existing system
   
5. Ideal for sump, filter chambers, and sump tanks
   
6. Suitable for existing aquariums and flexible system designs
   
7. Robust, compact design
   
8. Digital temperature control
   

Technical Specifications for the TECO Aquarium Chiller DI 1000
Model: TECO DI 1000
Type: Drop-In Aquarium Chiller
Recommended aquarium size: up to 1000 liters*
Power consumption: 235 W
Refrigerant: R290
Power connection: 230 V/50 Hz
Dimensions: 310 × 310 × 458 mm
Ambient temperature: 16-38 °C

* Manufacturer’s specification under the following conditions: room temperature 30 °C, water temperature 25 °C, heat load 0.2 W/L.