Tangit PVC-U Adhesive
5.0 (4)Tangit PVC-U is a special and ready for use adhesive for the water resistant gluing of PVC-U (hard). The adhesive fulfills DIN 16970. Clean both surface ends thoroughly with Tangit Cleanser and clean tissue paper.
PVC Fittings
PVC Tube
5.0 (7)With fittings made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The different fittings are matched to each other and therefore fit together perfectly. In addition to elbows, pipes and bends, there are various screw joints and threaded pieces available for the permanent connection of pumps and filters.
PVC 3-Way Ball Valve T-Hole
With socket on every site. Removable. This ball shut-off valve is equipped with adhesive sockets on all 3 sides and can also be removed by means of the screw fittings.
Aqua Medic Outlet Strainer
5.0 (1)Aqua Medic Outlet strainer are manufactured out of ABS pipe and have slits to prevent coarse detritus passing through. Available in the following diameter pipe sizes: 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm (outer diameter). The drain strainer can be inserted directly into the corresponding table duct.
PVC Ball Valve
5.0 (5)With pieces made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The different fittings are matched to each other and therefore fit together perfectly. In addition to elbows, pipes and bends, there are various screw joints and threaded pieces available for the permanent connection of pumps and filters.
Spare part set PVC Ball Valve CH
Spare part set consists of 3 pieces for the ball valve CH: coupling nut socket sealing ring.
VDL PVC Table duct with clamping nut
5.0 (1)With fittings made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The different fittings are matched to each other and therefore fit together perfectly. In addition to elbows, pipes and bends, there are various screw joints and threaded pieces available for the permanent connection of pumps and filters.
PVC Table Duct with fusion spigot
5.0 (2)With fittings made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The different fittings are matched to each other and therefore fit together perfectly. In addition to elbows, pipes and bends, there are various screw joints and threaded pieces available for the permanent connection of pumps and filters.
Tangit PVC Cleanser
5.0 (2)Tangit PVC Cleanser is a highly effective cleaner for the cleansing of PVC-U, PVC-C and ABS before gluing with Tangit adhesive. Freely of chlorinated hydrocarbon. Clean both surface ends thoroughly with Tangit Cleanser and clean tissue paper..
PVC Check valve
4.0 (1)PVC fittings make it easy to create pipework for aquariums or entire systems. The different fittings are designed to work together perfectly. In addition to elbows, pipes and bends, there are a variety of screw fittings and threaded pieces to connect pumps and filters.
Aqua Medic Overflow Comb with Holder
4.0 (1)Aqua Medic overflow comb with holder, for the construction of aquarium overflows. The water runs evenly through the comb. Plant debris and dirt are trapped, fish remain in the aquarium.
Aqua Medic Overflow Comb with Clip
5.0 (1)Aqua Medic overflow comb, for the construction of aquarium overflows. The water runs evenly through the comb. Plant debris and dirt are trapped, fish remain in the aquarium.
Aqua Medic combfix
Aqua Medic combfix is a optional support for fixing the overflow comb (comb 50) to the aquaria without the need for glueing (6 pcs.). The holders made of black ABS are suitable for glass thicknesses up to 12 mm..
PVC Reducing bash short
5.0 (1)With PVC fittings you can realise a complete pipe system for your aquarium. You can connect pumps, filters and more than one aquarium to a system. All PVC fittings will be glued with a special PVC glue.
PVC Reducing bash long
5.0 (1)With PVC fittings you can realise a complete pipe system for your aquarium. You can connect pumps, filters and more than one aquarium to a system. All PVC fittings will be glued with a special PVC glue.
VDL PVC Hose Nozzle with fusion spigot
5.0 (2)PVC fittings allow you to create a complete piping system for your aquarium. You can connect pumps, filters and more than one aquarium to a system. All PVC fittings are glued with a special PVC glue.
PVC Adaptor union with fusion spigot
5.0 (1)PVC fittings can be used to easily create piping for aquariums or entire systems. The various fittings are matched to each other and therefore fit together perfectly. In addition to elbows, pipes and bends, various screw connections and threaded pieces are available with which pumps and filters can be firmly connected.
PVC Cross Piece
With PVC fittings you can realise a complete pipe system for your aquarium. You can connect pumps, filters and more than one aquarium to a system. All PVC fittings will be glued with a special PVC glue.
PVC Tee 45°
5.0 (1)With fittings made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The various fittings are matched to each other and thus fit together perfectly. In addition to elbows, pipes and bends, various fittings and threaded pieces are available, with which pumps and filters can be firmly connected.
Tube clip with clip
5.0 (1)PVC Tube clip with clip for mounting of the PVC pressure pipe. The clip is available in the follwing sizes: - 50 mm - 63 mm - 75 mm - 90 mm - 110 mm - 160 mm The exact dimensions on the Infopage..
Tube clip whitout clip
PVC Tube clip for mounting of the PVC pressure pipe. The clip is available in the follwing sizes: 10 mm 12 mm 16 mm 20 mm 25 mm 32 mm 40 mm.
PVC Elbow 90° 3 Way
PVC elbow 90 ° with three outlets and glue sockets on all sides. All outlets in the same diameter. Available in sizes: 20 mm 25 mm 32 mm 50 mm.
PVC Elbow 90°
5.0 (2)With fittings made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The various fittings are matched to each other and thus fit together perfectly. In addition to elbows, pipes and bends, various fittings and threaded pieces are available, with which pumps and filters can be firmly connected.
PVC Elbow 90°pressure resistant up to 16 barTop Seller2.20 €*
PVC Elbow 45°pressure resistant up to 16 bar2.90 €*
PVC Elbow 90° reducingpressure resistant up to 10 bar2.60 €*
PVC Elbow 90° with male threadpressure resistant up to 10 bar2.60 €*
PVC Elbow 90° with female threadpressure resistant up to 10 bar2.35 €*
PVC Elbow 90° with female thread, reinforcedpressure resistant up to 16 bar4.60 €*
PVC Adaptor socket
With pieces made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The different fittings are matched to each other and therefore fit together perfectly. In addition to elbows, pipes and bends, there are various screw joints and threaded pieces available for the permanent connection of pumps and filters.
PVC Adaptor nipple
5.0 (1)With PVC fittings you can realise a complete pipe system for your aquarium. You can connect pumps, filters and more than one aquarium to a system. All PVC fittings will be glued with a special PVC glue.
VDL PVC Pipe Bend 90°
VDL PVC bend 90° made of tube, pressure resistant up to 10 bar, the exact dimensions on the Infopage.
PVC Thread Plug
With fittings made of PVC, the so-called PVC fittings, piping of aquariums or entire systems can be realized without any problems. The various fittings are matched to each other and thus fit together perfectly. In addition to elbows, pipes and bends, various fittings and threaded pieces are available, with which pumps and filters can be firmly connected.
