JBL ProFlora CO2 Set Basic are modern, user-friendly CO2 systems with functional details and simple operation. As entry-level systems, these CO2 systems are ideally suited for beginners. The set includes all components to visibly promote the growth of aquarium plants by adding CO2.
With the CO2 system JBL ProFlora CO2 Set Advanced you are well equipped and have a CO2 system that brings decisive advantages. There are three models to choose from, which are identically equipped except for the CO2 pressurized gas cylinder. In addition to an effective CO2 diffuser, the JBL ProFlora CO2 Advanced systems have a solenoid valve for night shut-off and a pressure gauge with two pressure gauges that indicate the working pressure and the false pressure.
With the pressure reducer JBL ProFlora CO2 Regulator Basic, JBL has succeeded in creating an inexpensive yet high-quality pressure regulating fitting for refillable as well as for disposable CO2 pressurised gas cylinders. The two pressure gauges have been deliberately omitted in order to keep the cost of the pressure regulator low. These displays are not strictly necessary, as - unlike with diving cylinders with compressed air - the cylinder pressure does not slowly drop, and you do not need to be warned when the cylinder is running low.
JBL ProFlora CO2 Regulator Advanced is a very high quality CO2 regulator for all common CO2 disposable and refillable cylinders. The regulator has two pressure gauges that reliably and accurately indicate the cylinder pressure and the working pressure. The practical knurled screw allows the pressure reducer to be mounted on the CO2 cylinder without tools.
The JBL ProFlora CO2 Valve solenoid valve reliably controls the supply of CO2 to the aquarium. The CO2 supply can be interrupted at night by the time switch on the lighting or, in combination with electronically ph controller, the CO2 supply can be varied according to the pH level. The JBL Proflora CO2 Valve has been designed to operate with JBL pressure reducers, but it is also suitable for use with almost any other commercially available pressure reducer.
JBL Proflora pH Sensor Set is a high quality electrode for pH value measuring with cleaning and calibrate solutions. This probe can be connected to th JBL Proflora pH Control unit or all other pH value measuring and regulating systems with BNC connector. The electrode is filled with gel and very sturdy.
JBL ProFlora Calibration Set is a complete set with liquids requried for professionally calibrating of pH sensors (electrodes). JBL ProFlora Calibration Set + 50 ml pH 7.00 buffer solution + 50 ml pH 4.00 buffer solution + 50 ml de-ionised water + 3 cuvettes Easy to use: Fill buffer solutions into cuvettes. Immerse pH electrode in calibration solutions according to instructions and rinse afterwards.
JBL ProFlora CO2 Control - the latest measurement and control technology measures the pH value and temperature and regulates the pH value and supply of CO2 relialby and fully automatically. This ensures luxuriant plant grwoth and healthy fish. The JBL ProFlora CO2 Control has a coloured touch display for easy operation as well as a whole range of useful features never before incorporated in equipment of this class.
JBL ProFlora 500 U disposable CO2 cylinder filled with 500 g CO2 for JBL disposable CO2 system (u system) and for the JBL CO2 sets Easy 1 and Easy 2. Available as singe cylinder and as 3in1 value pack. JBL ProFlora CO2 Cylinder 500 U + CO2 storage cylinder for all CO2 systems.
JBL ProFlora CO2 Refill Bio are the refill components for the JBL Bio-CO2-systems, consists of the bio components (A and B). JBL ProFlora CO2 Refill Bio: + bio-components (A and B) for bio-CO2 systems + easy to use: simply add complete refill to the diffusor container and fill with water + provides aquariums of 30 - 80 l with the basic plant nutrient, carbon dioxide (CO2) for 40 days + natural, biological process: CO2 extraction through fermentation process + including stabiliser for constant CO2 production + consists of the two components A and B.
Original temperature probe for the JBL pH Control Touch system. Cable length: 3.2 m..
The JBL JBL ProFlora Taifun inline is a high performance direct diffuser for CO2. This practical CO2 direct diffuser saves a diffuser in the aquarium, a bubble counter as well as a check valve and due to ist unique functioning it also saves 20% CO2. The only prerequisite is the use of an external filter with a suitable hose connection.
Replacement membrane for the JBL ProFlora direct CO2 inlinediffuser 12/16, 16/22 and 19/15 (JBL ProFlora CO2 Taifun Inline). + Membrane ensures the finest atomization of the CO2 in the diffuser + can be changed in the JBL ProFlora direct in only a few steps + especially effective diaphragm for the CO2 diffusion + made of macromolecular PE material + a yearly replacement is recommended + complete kit consists of PE diaphragm and 2 seal rings.
JBL ProFlora Count Safe is a bubble conuter for the exakt adjustment of the CO2 quantity with built-in check valve. + for an accurate addition of CO2 to an aquarium + suitable for all common CO2 systems + easy control of CO2 supply even outside the aquarium + easy to clean and to fill + optional fixing with suction cups or srews.
JBL ProFlora Taifun Spiral 10 is a diffusion system for CO2 in modular design. It provides the non lost CO2 diffusion into the aquarium water. The modular construction of the JBL ProFlora Taifun reactor allows the reactor to be adapted to practically any size of aquarium with optimum CO2 utilization.
JBL Taifun extend is a extension set for the JBL CO2 diffusion system Taifun. JBL Taifun extend is also suitbale vor the JBL Vario reactor. Visibe and efficient diffusion of CO2.
Suction cup with holder as spare part for the JBL CO2 reactors Vario and Taifun. Also to use for all other round things with a diameter from 37 - 45 mm. Content: 2 pieces..
JBL ProFlora Taifun Spiral 5 is specially designed for small aquariums, in particular the increasingly popular nano aquariums. It is also ideally suited for operation with Bio-CO2 systems. The modular construction of the JBL ProFlora Taifun Spiral 5be adapted to practically any size of aquarium with optimum CO2 utilization.
JBL ProFlora Taifun Glass Midi is a small, attractively designed CO2 diffusor with ceramic membrane for even enrichment of the aquarium water with the basic plant nutrient, carbon dioxide (CO2). With special ceramic for particularly small and even-sized CO2 bubbles. High quality glass design, easy to clean.
JBL ProFlora CO2 Cylinder 500 M filled with 500 g CO2 gass. With external valve (W21.8 x 1/14) and cage. Suitable for the JBL CO2 system (m-system) or any other CO2 system with refillable cylinders.
JBL ProFlora CO2 Starter Bio Set is a simple and easy to use Bio-CO2-System for aquaria from 10 up to 40 litres content. CO2 is the main nutrient which all aquarium plants require in order to grow healthy and strong. In doing so, plants provide the fish and other living organisms in the aquarium with vital oxygen.
JBL sealing ring for the JBL CO² Pressure reducer vario 500. Content: 1 O-ring..
JBL O-ring for the pressure reducer in the screw connection to the CO2 bottle. Suitable for all JBL CO2 systems of the ProFlora -m series and -u- series. The sealing ring between bottle and pressure reducer should be replaced each time the bottle is changed.
JBL ProFlora Safe Stop is a special non-return valve for CO2. Non-return valve with washer, pre-tensioned by a spring, preventing water leaking into the pressure regulator and CO2 cylinder. CO2 has a very powerful diffusion strength which, if a normal non-return valve was used, would draw water from the aquarium through the valve as far as the storage cylinder..
JBL ProFlora Taifun Tube is a high-quality CO2 hose, which is certified impermeable to CO2. JBL ProFlora Taifun Tube + for the safe, loss-free conduction of CO2 gas in CO2 fertiliser systems for aquariums + use: cut the hose to the correct length before insertion. Always keep hose length as short as possible.
With the JBL ProFlora Adapt u- disposable for Dennerle, you can also use the pressure reducer of your Dennerle CO2 system for JBL u- disposalbe cylinders. Using the adapter is extremely simple and uncomplicated: screw the adapter into the pressure reducer, then screw the pressure reducer onto the bottle u500. JBL ProFlora Adapt u- disposal for Dennerle + adaptor for Dennerle pressure reducer suitable for disposable bottles JBL u500 (M10 x 1) + enables you to screw the pressure reducer (thread M10 x 1.25) onto u500 disposable bottles with thread M10 x 1.
The JBL foot for CO2 bottles is suitbale for the JBL 500 g CO2 bottle m500 or all other CO2 cylinders with 60 mm diameter. Provides a firm base, easy to install no drilling necessary..
JBL ProFlora CO2 Cylinder Wallmount to securely fasten all 500 g CO2 refillable cylinders, with a screw-on safety bracket (cage). Screw the wall mount to the furniture or wall (screws included). Hang the CO2 cylinder by inserting the upper part of the safety bracket into the wall mount.
JBL ProFlora Adapt u-m adapts the JBL CO2 pressure regulator ProFlora u001 for use with refillable cylinders. Simply screw on to the pressure regulator using an Allen key (6). Can be converted back for use with disposable cylinders (e.g.
