Aquaristik Shop

Measuring & Computer

>

Measuring & Regulating

>

Aqua Light

>

Aqua Light Temperature Controller TC-320


Aqua Light Temperature Controller for automatically regulating the water temperature of an aquarium. There can be connect an cooling unit and an heater at the same time to this controller. The temperature of the aquarium water will be measured regulated permanently. The digital display shows the actual water temperature.

Aqua Light Temperature Controller TC-320
Vergrößern

Aqua Light Temperature Controller TC-320

temperature controller for heating and cooling
Price  
  39.95 EUR 

Price including german VAT plus shipping costs


  • Aqua Light Temperature Controller for automatically regulating the water temperature of an aquarium. There can be connect an cooling unit and an heater at the same time to this controller. The temperature of the aquarium water will be measured regulated permanently. The digital display shows the actual water temperature.

    Aqua Light Temperature Controller TC-320
    + fully automatically aquarium water temperature regulation
    + switching capacity: 1100 W
    + heater and coolin unit can be connected
    + display shows the water temperature
    + regulating range: 16-40C
    + measuring range: -40 to +100C
    + resolution: 0.1C
    + regulating accuracy: +/- 1C
    + power connection: 220V/50-60 Hz (+/- 10%)
    + input: 1 NTC sensor
    + output: relais (10A)
    + switching differency programmable: 1 to 16C
    + dimensions dispay: 82x45 mm


    Do you have questions about this article ?
  • Reviews for Aqua Light Temperature Controller TC-320:
    Write a review

    at 18.12.2017:
    Very easy to programme with a couple of clicks of the set button.has a good clear display which is easy to see even when not illuminated

  • Nigel M. wrote about Aqua Light Temperature Controller TC-320 in July 2018:
    If using just to run heaters does it matter which socket you use, 1 or 2?

    Aquaristikshop.com:  The sockets are indicated. Please one use the heater socket for connecting an heater.
    kay m. wrote about Aqua Light Temperature Controller TC-320 in July 2018:
    Please advise I can plug two heaters in one controller and not just one heater and one cooler

    Aquaristikshop.com:  One socket is for an heater, the other oen for an cooling unit. If you want to connect more than one heater, you can use a normal plug extension.
    Please take care of the maximum load of 1100 W.




  • tony m. wrote about Aqua Light Temperature Controller TC-320 in 2017:
    Very easy to programme with a couple of clicks of the set button.has a good clear display which is easy to see even when not illuminated



  • Nigel M. wrote about Aqua Light Temperature Controller TC-320 in July 2018:
    If using just to run heaters does it matter which socket you use, 1 or 2?

    Aquaristikshop.com:  The sockets are indicated. Please one use the heater socket for connecting an heater.
    Show all questions (2)